Mathematical Modeling of Heat Flux Distribution of Plasma Arc by Transverse Alternating Magnetic Field
Jianbing Meng and Xiaojuan Dong
The Open Mechanical Engineering Journal, 2013; 7: 1.
Electronic Publication Date: May 3, 2013Research on Production Strategy with Carbon Emissions
Honglei Tang and Guofang Song
The Open Mechanical Engineering Journal, 2013; 7: 9.
Electronic Publication Date: May 17, 2013Stress and Fatigue of Connecting Rod in Light Vehicle Engine
Bin Zheng, Yongqi Liu and Ruixiang Liu
The Open Mechanical Engineering Journal, 2013; 7: 14.
Electronic Publication Date: July 12, 2013Longitudinal Residual Stress Analysis in AA2024-T3 Friction Stir Welding
Pierpaolo Carlone and Gaetano S. Palazzo
The Open Mechanical Engineering Journal, 2013; 7: 18.
Electronic Publication Date: August 23, 2013FEM-BEM Numerical Procedure for Insertion Loss Assessment of an Engine Beauty Cover
E. Armentani, R. Trapani, R. Citarella, A. Parente and M. Pirelli
The Open Mechanical Engineering Journal, 2013; 7: 27.
Electronic Publication Date: August 30, 2013The Effect of “Toggling” on the Pullout Strength of Bone Screws in Normal and Osteoporotic Bone Models
P.S.D. Patel, D.W.L. Hukins and D.E.T. Shepherd
The Open Mechanical Engineering Journal, 2013; 7: 35.
Electronic Publication Date: October 4, 2013An AUV for Ocean Exploring and its Motion Control System Architecture
Lei Zhang , Da-peng Jiang , Jin-xin Zhao and Shan Ma
The Open Mechanical Engineering Journal, 2013; 7: 40.
Electronic Publication Date: October 18, 2013Aeolian Tones Radiated from Flow Over Bluff Bodies
Mohamed Sukri Mat Ali, Sheikh Ahmad Zaki Shaikh Salim, Mohamad Hafz Ismail, Sallehuddin Muhamad and Muhammad Iyas Mahzan
The Open Mechanical Engineering Journal, 2013; 7: 48.
Electronic Publication Date: October 18, 2013Control Systems Integration for Enhanced Vehicle Dynamics
M. Velardocchia and A. Vigliani
The Open Mechanical Engineering Journal, 2013; 7: 58.
Electronic Publication Date: October 18, 2013An Innovative Planetary Gear Reducer with Overcoming the “Dead Point”
Feng Guan, Chuanxi Zhou and Qingshi Huang
The Open Mechanical Engineering Journal, 2013; 7: 70.
Electronic Publication Date: October 18, 2013Study on the Pressure and Temperature Distribution of Solid-Plug Conveying Element on Centrifugal Extruder
Zhao Jing, Wang Jing and Wang Shijie
The Open Mechanical Engineering Journal, 2013; 7: 76.
Electronic Publication Date: November 15, 2013Study on Automatic North-Seeking Key Technologies of Maglev Gyroscope
Shi Zhen, Yang Zhiqiang and Zhang Zhe
The Open Mechanical Engineering Journal, 2013; 7: 83.
Electronic Publication Date: November 29, 2013Residual Strength Improvement of an Aluminium Alloy Cracked Panel
F. Caputo, G. Lamanna and A. Soprano
The Open Mechanical Engineering Journal, 2013; 7: 90.
Electronic Publication Date: November 29, 2013Experimental Evaluation of the Energy Performance of an Air Vortex Tube when the Inlet Parameters are Varied
E. Torrella, J. Patiño, D. Sánchez, R. Llopis and R. Cabello
The Open Mechanical Engineering Journal, 2013; 7: 98.
Electronic Publication Date: November 29, 2013An Optimization System Applied in Optical Design of LED Light Guide Plate
Wen-Chin Chen, Pen-Hsi Liou and Bo-Jui Chen
The Open Mechanical Engineering Journal, 2013; 7: 108.
Electronic Publication Date: November 29, 2013Development of Ceramic Three-Dimensional Design System Based on Sketch
Li Busheng and Hu Jingfang
The Open Mechanical Engineering Journal, 2013; 7: 116.
Electronic Publication Date: November 29, 2013Static and Dynamic Characteristics of the Chain Drive System of a Heavy Duty Apron Feeder
Junzhou Huo, Shiqiang Yu, Jing Yang and Tao Li
The Open Mechanical Engineering Journal, 2013; 7: 121.
Electronic Publication Date: November 29, 2013Disturbance Observer Based Heave Compensation Control for Benthic Coring Drill
Y. Guo, Y.P. Jing, M. Jiang and B.W. Luo
The Open Mechanical Engineering Journal, 2013; 7: 129.
Electronic Publication Date: December 27, 2013
